XCMG official manufacturer GR215 blade grader(more models for sale)
XCMG GR215 motor grader
Engine Cummins or Shangchai
High performance and long service
The XCMG GR Series Motor Graders are mainly used in ground leveling
,canalling , slope scraping ,earthmoving ,scarification or snow
removal work on road, airfield ,farmland ,and so on .They are
necessary construction machines for national defense engineering
,mine construction, town and country roads building ,and farmland
Performance and characteristic
·New appearance design.
·The articulation frame is adopted and matched with the steering of
the front wheel, With small turning radius,maneuvering and flexible.
·The electro-hydraulic controls the power shift gearbox,with 6ahead gears and 3 back gears.
·The international matching hydraulic parts are adopted,with reliable operation.
·The motions of the blade are fully hydraulically controlled.
·The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.
·The manipulation table and seats are adjustable. The arrangement of
the manipulation handle and instruments are reasonable,with convenient application,and the comfort of driving is improved .
·The cab is grand and nice,with wide eyeshot and good sealing .
·The front bulldozing plate, rear scarification device,front scarification harrow and automatic leveling device can be
|Rated power/speed||153kW/2200rpm 160kW/2200rpm|
|Travelling speed ,forward||5,8,11,19,23,38 km/h|
|Travelling speed ,reverse||5,11,23 km/h|
|Tire inflation pressure||260 kPa|
|Working hydraulic pressure||16 MPa|
|Max. steering angle of front wheels||±50°|
|Max. lean angle of front wheels||±17°|
|Max. oscillation angle of front axle||±15°|
|Max. oscillation angle of balance box||15|
|Frame articulation angle||±27°|
|Min. turning radius using articulation||7.3m|
|Maximum lift above ground||450mm|
|Maximum depth of cutting||500mm|
|Maximum blade position angle||90°|
|Blade cutting angle||28°—70°|
|Circle reversing rotation||360°|
|Moldboard width X height||4270×610mm|
WAREHOUSE PTOS :
SPARE PARTS WAREHOUSE :
DUMP TRUCK ;TANKER TRUCK ;MIXER TRUCK;TRACTOR TRUCK ;CARGO
ROLLOER ;LOADER;EXCAVATOR ;TRUCK CRANE ...ETC
LOWBED ;TANK ;BULK CEMENT ;CONTAINER ;FLATBED TRAILER ....ETC
SPARE PARTS ;TIRE ...ETC
1. Dump trucks; cargo trucks (1-120ton)
2. Tractor trucks; (1-120 tons)
3.Tanker trucks,( water tanker and oil tanker)
4. Mixer trucks and concrete pump truck
5. Mine dump trucks( 30 tons off-road mine tipper, 50tons/70tons
mine dump truck, 6x6 articualted dump trucks)
6. Off-road drive trucks( 4x4. 6x6 and 8x8 Trucks)
7. Garbage trucks( garbage compactor truck, suction trucks)
8. Truck mounted cranes(normal road truck crane, truck mounted
9. Special trucks( wrecker trucks, military trucks...)
10.Semi trailers( container semi-trailer, low-bed semi-trailer,
tanker trailer, dumper trailer...)
11.Truck spare parts
1.Wheel loader,Backhoe loader
6.Crane(truck crane,crawler crane,truck mounted crane,self erecting
7.Forklift and 45t contain reach stacker
8.Paver and so on
9. Spare parts